plywood boat without fiberglass
Note: resin without hardener is never used. always add hardener in the 5 to 1 ratio. about the cloth the fiberglass cloth used in fiberglassing a typical plywood boat must be compatible with epoxy resin. although most cloths will work with epoxy, there are some that are not compatible. I have a 15 ft. 1980 tuffy fishing boat. i am building new casting decks out of 3/4" treated plywood. do i need to use fiberglass matting or can i just roll on a couple layers of epoxy resin to seal it. On smaller, simpler, low-powered boats without a lot of curvature, i see nothing wrong with this practice, and again, have not heard of such a boat disintegrating over time because of it. q: why should i cover my plywood boat with fiberglass? a: we generally recommend covering all plywood boats with fiberglass no matter how small. while some. 
plywood boat without fiberglass Mix and apply fiberglass filler, to eliminate any air gaps between the plywood and fiberglass and round off the edges of the plywood. total time: 45 minutes. (note – if you’d like to improve the final looks with a smoother finish, allow the filler to harden completely and then spend an additional 30 minutes grinding it down). Fiberglass is used to build boats for many reasons. chief among these are its durability, but also its easy to repair. you can patch boat holes in an afternoon and fiberglass a boat in just a couple of days. this article covers how to fiberglass a boat using epoxy resin.
No comments:
Post a Comment