plywood boat building techniques
Boatbuilding tips for amateurs. for any amateur, one of the best boatbuilding tips is to aspire to producing an excellent finish on your boat. challenge yourself, right from the start, to work to the highest standard of finish that you can, even on the parts that will be hidden from view. Many boats are built with exterior grade plywood and they can give give long service. exterior grade plywood is considerably cheaper than marine grade but everything comes at a price, of course. exterior grade is heavier, made to a lower and less stringent standard and could have any of a variety of timber species in the construction. The stitch and glue boatbuilding method is an easy way for a beginner to make a plywood boat. in a nutshell stitch and glue boatbuilding has 4 major steps. plywood parts of the boat are measured and cut according to plans. small holes are made around the edges of the pieces. 
plywood boat building techniques Frame and plywood. building a hull with frames and plywood generally goes like this: the first thing is to build the frames, bulkheads, transom and stem-piece as shown on the plans and mark them by frame number. typically the frames are of 4 to 8 mm plywood with framing of clear pine or cedar. Before stitch and glue method to build a boat became popular, plywood boats were often made by constructing a framework which was then sheathed with plywood. the plywood would be affixed to the frames using a variety of methods such as glue, screws and even nails, nowadays it is normal to use epoxy.
No comments:
Post a Comment